LED Series exit signs feature an enclosure resistant to corrosive atmospheres, non-hazardous dust environments, water spray or splashing water.
CONSTRUCTION The Wet Location LED Exit Signs are designed with the extremes of the environment in mind. The fully gasketed polycarbonate lens and fiberglass housing allows these signs to be installed in locations that require NEMA 4X protection. The Wet Location LED Exit Signs are available configured with high-output LED's in AC only and Self-Powered operation versions.
INTERNAL SPECIFICATIONS AC ONLY: standard 120/277VAC input
EXTERNAL SPECIFICATIONS The Wet Location LED Exit Signs housing is constructed from durable, corrosion resistant fiberglass. The housing is fully gasketed for wet location applications and is supplied standard in a gray finish. Four (4) polycarbonate pressure screws firmly hold the polycarbonate lens in place. Wall or end mounting configurations are Standard. Single Sided and Removable chevron arrows are standard on each unit. The self-powered version comes standard with an external LED status indicator and test switch.
ELECTRICAL SPECIFICATIONS The Wet Location LED Exit Signs are configured with high-output LED lamps. LED is standard with 120/277VAC input. All LED versions consume only 1.1W nominal power.
MECHANICAL SPECIFICATIONS The Wet Location LED Exit Signs housing is constructed from durable, corrosion resistant fiberglass. The housing is fully gasketed for damp, wet and NEMA 4X locations with a hot-bonded silicone gasket. Exit face(s) are made from a high clarity, clear polycarbonate. Field removable chevron arrows are standard on each face. Four (4) polycarbonate pressure screws firmly hold the face to the housing.
EXTREME CLIMATE DESIGN The Wet Location LED Exit Sign has been designed to perform in applications where the climate would punish any standard sign. The entire internal cavity of the sign is protected from moisture invasion by an extremely resilient gasket. The gasketing is "hot-bonded" to the lens during the manufacturing process. This procedure eliminates any chance of the gasketing to become dry and pull away from the lens. The gasketing always holds its original form and has "memory retention" so that it effectively and consistently protects these signs from moisture. The fiberglass housing is highly corrosion resistant and will not rust or rot. The molded fiberglass finish cannot be scraped or scratched away exposing raw metals like standard steel signs.
WARRANTY Unit: (excluding lamps) 3-years full coverage against defects in materials and workmanship from date of shipment
DIMENSIONS 12" Length 6.88" Width 12" Height
LISTINGS UL/CSA, ETL
CODES Meets NFPA 101, NEC, OSHA
OPTIONS AVAILABLE Please Call 800-339-7690 for all available options on this unit.